Blender

Time in this 3D hair journey for 3 Rs - Research, Review, Reflection

This entry is part 6 of 6 in the series Hair for 3D models

A long time ago I was a teacher. Besides the normal three Rs (reading, writing and arithmetic), I always followed with a second three – Research, Review, Reflection. For me, these were consolidation exercises that deepened my understanding. Each of you will have to do this for yourselves. I just thought that I would share my experience of it in learning about 3D hair. Research I watched several Blender and Photoshop

Test rendering a transparent hair texture in #Blender

This entry is part 4 of 6 in the series Hair for 3D models

In my last post (about an hour ago), I commented that while occlusion maps were good, I wondered what the hair would be like if I used a texture that already had transparency. So I quickly cobbled one together in Photoshop that was based on the same two textures that I used in the last post. Here is the node set-up that I used in Blender: Note that it is

Test rendering the hair opacity map in #Blender

This entry is part 3 of 6 in the series Hair for 3D models

Hi folks, the purpose of today’s post is to document my testing of the hair opacity map that I created in my last post. I am doing so in Blender cycles and I will be assigning the hair texture and the opacity map to a bezier curve. Huh! A Bezier curve! Yep. At the end of my post, I shall place a link to a great Youtube tutorial called “How

Creating the Starship image - Top 3 mistakes and/or lessons learned  #Blender

This entry is part 3 of 3 in the series Blender Spaceship No. 2

This post is about the top 3 mistakes made and lessons learned in making my recent Starship image in Blender. Hence it is probably not the most exciting of posts. This said, I always feel the need to share such things with others in case anyone cares to learn from my mistakes. So here goes. Failing to plan is planning to fail An oldy but a goody. As anyone who

My latest starship - greebles & lighting added, composition complete - done #Blender

This entry is part 2 of 3 in the series Blender Spaceship No. 2

My goal was to emulate the old-school spaceship art of the 1970s. Hopefully, I succeeded. This post will be a bit of a technical run-down in how I did it. Not too much detail, otherwise it will be super-dull. So you remember where I was at with my last post: I asked for feedback and got some great stuff. I experimented with the suggestions to see whether I liked them

First rough of new Spaceship scene  #Blender

This entry is part 1 of 3 in the series Blender Spaceship No. 2

Hi folks, Just a quicky because I have to get myself and the family ready and run out soon. It’s been a busy past few weeks (new job, end-of-year obligations, family etc) and I”ve hardly managed to make it to the PC.  Yesterday I did and so decided to use some of the new things I’ve learned in Blender this year to have another attempt at a space scene. The

More of the door   #Blender

This entry is part 9 of 9 in the series Art-nouveau door

Hi folks, I was unable to do much door work this week until today. Mostly I worked on the door itself. This meant painting the actual door texture based loosely on the reference picture. So here is the reference picture: And here is the texture I painted in Photoshop: I tried to make it look “used” and also admit to tracing a little bit :) I then turned it into a

Completely reworking Textures and normal map on door  #Blender

This entry is part 8 of 9 in the series Art-nouveau door

NOTE: a bit of a technical one today. So now I had a proof of concept design and had commenced a bit of trial work on it. Thing is, I always believe in self-critique. I sat down and looked at what I had done so far and whether it was correct. I noticed a few things, listed in the diagram below: I also decided that I wanted the bottom of

Normal map now on brick wall  #Blender

This entry is part 7 of 9 in the series Art-nouveau door

Hi all, Despite being tired, I came home and used Photoshop to make a normal map of the brick wall. This is just a filter in Photoshop that I applied to the skin I created earlier. Here is the normal map image: For those of you new to 3D modeling, this will give me some depth in my final image. I had intended to create a displacement map, but I need to

Baking my procedural texture    #Blender

This entry is part 6 of 9 in the series Art-nouveau door

In my previous post in this series, I had unwrapped each of my objects, ready to texture them. Then I had an epiphany: if procedural textures exist, then does a brick one exist? OK – I’ll put that into plain English for the non-modelers or new modelers braving this post. A procedural texture is basically an image that has been created by writing a computer program instead of drawing it

Progress on #Blender door as at 5 Nov 2017

This entry is part 5 of 9 in the series Art-nouveau door

Due to illness, I have not achieved as much as I had hoped. Also note, this post talks a bit about technical 3D modeling issues, but I have tried to make it accessible to my non-technical readers who may be interested in starting to model. The first thing that I have done is set the pivot point on each object within my model. This is not something that I have done

Art-nouveau door - progress - rigging to open and close properly  #Blender

This entry is part of 9 in the series Art-nouveau door

Hi all, just a brief update on the doorway. I have now successfully rigged my door to open in the doorway. So another task complete. I found the following video very easy to understand in rigging my door: https://www.youtube.com/watch?v=r2mIOFDgdME&t=70s So another of this week’s tasks is now achieved. :) Greg

A little progress on my art-nouveau doorway

This entry is part 3 of 9 in the series Art-nouveau door

Hi all, this was my wife’s birthday weekend, so I only got about an hour to play in Blender. Just thought that I would show you the progress. So the basic objects are all there. Now to start making it look real. As an aside, I made my first ever Panna cotta today as a treat for Nicole and it was yummy. :) However, I experienced failure with the accompanying toffee

Art-nouveau door - commenced Blender work

This entry is part 2 of 9 in the series Art-nouveau door

Hi folks, I am delighted to say that I am ahead of this week’s plan as posted on Monday. The final thing I ticked off today was my goal of singing practice. I spent an hour this morning with my mate Jon practicing Dean Martin’s “Sway”, Frank Sinatra’s “Fly Me to the Moon” and Elvis’ “Can’t Help Falling in Love”. This left me the afternoon to work on some of

Art-nouveau door - general design for a 3D model

This entry is part 1 of 9 in the series Art-nouveau door

Hi all, as per my weekly plan, here is a rough 2D design of the 3D art nouveau door that I intend to create in Blender. As per normal, my rough design has been completed in PowerPoint. The inspiration was taken from the following door (By Jopparn (Own work) [CC BY-SA 3.0 (https://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons): My vision is to create 4 elements in Blender: a wall with an appropriately

Initial thoughts on a 3D Art Nouveau setting to be made in Blender

This entry is part 2 of 2 in the series Digital set number one

Just a short post. I did my initial brain dump of design specifications in PowerPoint. These are fairly simple. Here is a link to a Google image search on Art Nouveau. What do you see? Curved lines and natural shapes. So I had a go at using PowerPoint to create some basic outlines of wall shapes. This said, they feel more Art Deco (i.e. more geometric that natural in form).

Next modeling project - a setting #Blender

This entry is part 1 of 2 in the series Digital set number one

Hi folks, Just a short one today. I’ve been pondering my next Blender graphics project for a week or so. I’ve decided upon a set. By this I mean a digital space for me to pose characters and make 3D images – much like a film set. I want a feature of the space to be ornamental doors and windows, probably in a style like Art Deco or Art Nouveau. This can be a

User Testing - finalising my model of an x-ray machine #Blender #EuroPCR

This entry is part 20 of 20 in the series My X-Ray model project

So you may remember that we started this project with an overall plan that follows the PMBOK (Project Management Body of Knowledge) approach to remodel a 3D likeness of an  x-ray machine that I first modeled a year ago for a presentation at EuroPCR 2016 – the official annual meeting of the European Association of Percutaneous Cardiovascular Interventions (EAPCI) and the world-leading Course in Interventional Cardiovascular Medicine. Here is the diagram of the

How did I make the x-ray machine model?  #Blender

This entry is part 19 of 20 in the series My X-Ray model project

(Sorry – this is a repost as my database corrupted and I had to do a restore. Annoying as I had been in a hurry and had not done my normal post-post backup. Lucky I had a copy of the text.) I’m a Blender noob, so let me show how I used my simple skills to make the objects. Now the bench was really easy. Essentially it is a whole

The model of the monitor is complete  #Blender

This entry is part 18 of 20 in the series My X-Ray model project

Well, didn’t this go quickly? The project is almost complete; much faster than expected.  I threw together the medical monitor today. Here it is from a couple of different angles: As you can see it also has a ceiling mount. I have not placed any images on the monitor, but I have created a texture that would easily permit images to be added as suitable for whatever process in being undertaken